Filter
Top Products
[ 27 ]
MEMORY DIALING
If you select a memory
location that does not
have a stored number, the
handset will beep rapidly
and the phone will not
dial.
Memory dialing from Talk Mode
1 Press . “Talk” and the volume setting appears.
2 Press .
3 Enter a two-digit number (01 - 20) to select the memory
location of the desired phone number. The selected
phone number is displayed. Then the number is dialed.
4 To hang up, press .
Talk 0:00
Talk 0:35
0123456789012
The 20 memory locations on the handset are not limited to phone numbers.
You may want to store in memory a group of numbers (up to 20 digits) that
you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your
bank, when you are prompted to enter the account number, simply press
and then the location where the special number has been stored.
Store your special number with identifying name in memory as you would a
phone number (Refer to “Storing Phone Numbers and Names” on page 22).
Enter a pause as necessary in the sequence.
A pause counts as one digit and represents a two second delay in time
between digits as they are sent.
Chain Dialing
If you set the ringer to off, “<Ringer Off>” appears
on the display.
MEMORY DIALING
TRU548 ENG O/M 7/18/01 15:41 Page 27