Filter
Top Products
GETTING STARTED[ 8 ]
• Even when the battery
pack is not being used,
it will gradually
discharge over a long
period of time. For
optimum performance,
be sure to return the
handset to the base
unit after a telephone
call.
• If you must replace the
battery pack during a
telephone call,
complete the
replacement of the
battery pack within 30
seconds, and you can
return to the original
call.
Battery use time (per charge)
From fully charged
• 6 hours continuous use
• 10 days when the handset is in the standby mode
Low Battery Alert
When the battery pack is very low and needs to be
charged, the phone is programmed to eliminate functions
in order to save power. If the phone is not in use, “
Low
Battery
” appears on the LCD and none of the keys will operate.
If the phone is in use, “
Low Battery” flashes and the handset beeps.
Complete your conversation as quickly as possible and return the
handset to the base unit for charging.
Cleaning the Battery Charging Contacts
To maintain a good charge, it is important
to clean the battery contacts on the handset
and base unit with a dry cloth or a pencil
eraser about once month.
Do not use any liquids or solvents.
The last number dialed in the redial memory, the names and the
numbers stored in the memory locations are retained for up to 2
minutes while you replace the battery pack.
TRU548 ENG O/M 7/18/01 15:39 Page 8