Filter
Top Products
17
Installing the Belt Clip
Line up the tabs with the holes on each side of the handset. Press the belt clip down until both
tabs click into place.
To remove the belt clip, pull both sides of the clip to release the tabs from the holes.
Connecting to the Phone Line
Once the handset battery pack is fully charged, connect the
telephone line cord to the TEL LINE jack and to a telephone
outlet.
Testing the connection
To test your connection, try making a call. If your call connects, the settings are ne. If your call does not connect,
check the following:
Check the AC adapter cord. Make sure it is securely connected to the DC IN connector and to a standard AC
power outlet.
Check to make sure the battery is fully charged. (If you don’t see the “battery full” icon, check to make sure
the battery is properly connected.)
Change dial mode (instructions on page 18).
1)
2)
3)
TEL LINE
TEL LINE
TEL LINE
TEL LINE