Filter
Top Products
14
Direct Wall Mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
Try to mount your phone within 5-feet of a working phone jack to avoid excessive
wire lengths.
Make sure the wall material is capable of supporting the weight of the base and
handset.
Use #10 screws with a minimum length of 1-3/8 inches, with anchoring devices
suitable for the wall material where the base unit will be placed.
Insert two mounting screws into the wall, using the appropriate anchoring device,
3-15/16 inches apart. Allow about 1/8 inch between the wall and screw heads for
mounting the phone.
Refer to the steps on page 13 to complete the mounting process.
•
•
•
•
1)
2)