Filter
Top Products
49
Press the OK soft key. MONITOR appears, and you hear sounds in the room
where the handset is installed.
To turn off the Room Monitor, press the END soft key or [ ] on either handset or
return the handset to the cradle.
If you want to prevent other handsets from monitoring the station, press the MENU soft
key on the handset. Select the HANDSET SETUP menu, and then the ROOM MONITOR
submenu. Select OFF and press the OK soft key.
Note:
This telephone system is not intended to replace an AC powered room monitoring system. The length of time
that a handset can monitor a room is limited to the talk time remaining on the handset battery (5 hours or
less). For more information, see Talk and Standby Times on page 53.
This feature only works when both handsets are within range of the base.
If the party is out of range, UNAVAILABLE appears in the display and the operation will be canceled.
While a pair of handsets is in Room Monitoring, the telephone system cannot be used to make or receive
calls. To resume normal telephone operation, you should press the END soft key on either handset or return
the handset to the cradle.
Tone Dialing Switch Over
If your telephone company requires pulse dialing, you can temporarily switch to tone dialing after the call connects.
This feature is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers,
telephone prescription rells, customer support menus, etc. If your phone is set to pulse dialing, make your call nor-
mally. Once your call connects, press [ ] on the handset. Any digits you enter from then on will be sent as tone di-
aling. When this call ends, the phone automatically returns to pulse dialing.
3)
4)
•
•
•
•