Filter
Top Products
[12]
INSTALLING THE PHONE
Connecting the Base and Corded Handset
1) Connect the corded handset Coiled cord to the left side of the
phone and to the corded handset.
2) Route the Coiled cord inside the molded wiring channel as
shown.
3) Connect the AC adapter to the DC IN 9V jack and to a standard
240V AC wall outlet.
CAUTION: To avoid risk of fi re and shock, only use the Uniden
AAD-065S(M) AC adapter.
4) Route the AC adapter cord inside the molded wiring channel as
shown.
5) Place the base unit close to the AC outlet to avoid long
extension cords.
6) Connect the telephone cord to the phone jack and to a
telephone outlet.
7) Set the base on a desk or tabletop. Place the corded base
handset in the base cradle.
INSTALLING THE PHONE
SSE17+1 OM.indb 12SSE17+1 OM.indb 12 15/7/08 12:08:27 PM15/7/08 12:08:27 PM