Filter
Top Products
4
Most cellular phones automatically transfer the audio to a x
Bluetooth device as soon as it pairs; if yours does not, look in
your phone's Bluetooth setup for a "transfer audio" or "send
audio to device" option.
To test the connecon
Pick up the handset from the cradle.1.
Dial the number you want to call, then press 2.
LINK
twice on the
handset. You may not hear a dial tone or ringing, but the handset
display says
Talk
.
Make sure the call connects and you can hear clearly. (When 3.
you’re finished, press
END
to hang up.)
The XDECT R035BT remembers the pairing information for
x
your cellular; if it loses connection with your phone for any
reason (e.g., the cellular phone travels out of range, runs out of
charge, etc.), the XDECT R035BT can automatically reconnect
the next time your phone becomes available.
Using the XDECT R035BT with two Bluetooth phones
The XDECT R035BT can save the pairing information for two x
different Bluetooth phones, but it can only use one cellular line at
any given time. For example, if you pair the XDECT R035BT to two
Bluetooth phones, when you press
LINK
on the handset, the XDECT
R035BT asks which phone you want to connect to.
If you are using the XDECT R035BT to talk on one Bluetooth
x
phone, the XDECT R035BT will not ring if a call comes in on the
second phone.
You can set a different ring tone for each paired cellular phone
x
(see page 15).
To pair a second Bluetooth phone, just repeat the pairing
x
procedure with the second phone. (If the first phone interferes
when you’re pairing the second, just turn off Bluetooth on the first
phone until you finish pairing the second one.)
XDECT R035 OM.indd 4 22/9/11 1:50:59 PM