Filter
Top Products
36
Reseng and Registering Handsets
If you are having trouble with a cordless handset or if you want to
replace one, you need to clear the registration information from the
base and the handset:
Do you have the base the handset is registered to?
Yes No
Press and hold 1.
END
and
#
until the
System Reset menu appears (about 5
seconds).
Select 2. Deregister HS. The display lists
all registered handsets.
Select the handset you want to reset.3.
When the handset asks you to 4.
confirm, select Yes. The handset
clears its information from the base
and deletes its own link to the base.
Press and hold 1.
END
and
#
until the System
Reset menu appears
(about 5 seconds).
Select 2. Base
Unavailable.
When the handset 3.
asks you to confirm,
select Yes. The
handset deletes its
own link without
contacting the base.
Registering a handset
When you reset a handset (or if you buy a new one), that handset
displays a
Handset Not Registered
message. If you see this message
on a handset, you need to register it to a base before you can use it.
Does the handset fit in the base cradle?
Yes No
Place the handset in the base.
The display should say Handset
Registering.
With the phone in standby, 1.
press and hold
FIND
on the
base for about 5 seconds.
On the handset you want 2.
to register, press and
hold
#
until the display
says Handset Registering
(about 2 seconds).
XDECT R035 OM.indd 36 22/9/11 1:51:16 PM