Filter
Top Products
15
Icon What it means
T-coil mode is on (see page 34).
The battery is 1) empty, 2) getting low, 3) half
charged, or 4) fully charged.
The signal from the base is 1) weak, 2) low, 3)
strong, or 4) very strong.
[Aa] The handset enters capital letters first (see page 16).
[aA]
The handset enters lower-case letters first (see page
16).
There is a cellular phone paired to MobileLink slot
#1, #2, or both. (When the paired Bluetooth phone
is ringing, on a call, or on hold, the slot number for
the paired phone blinks.)
Using the Menus
If you open the menu during a call, use x
PHONEBOOK/LEFT
to back
out of the menu without hanging up.
If you don't press any keys for 30 seconds, the handset exits the
x
menu.
The Handset Setup Menu
You can change these settings separately for each handset.
T-coil
Turn on T-coil mode to reduce noise on some hearing
aids (see page 34).
Ringer Tones
You can set a different ring tone for the land line and
each paired cellular phone. First, select the line you
want to set the ring tone for. Then, select the ring
tone that you want this handset to use for that line.
As you highlight each ring tone, the phone plays a
sample. When you hear the tone you want, press
MENU/SELECT
.
Personal Ring
Turn on the personal ring feature. This feature lets
you assign special ring tones to people in the cordless
phone’s local phonebook. When someone in your
phonebook calls, this handset uses the assigned ring
tone. (It doesn’t matter what line the person calls on,
as long as you have Caller ID service on that line.)
Banner Change the name used on the handset’s display.
Key Touch Tone Have the keypad sound a tone when you press a key.
The Ans. Setup menu
This menu controls the options and settings for your answering
system (see page 25).
The Day and Time menu
If you subscribe to Caller ID, the phone automatically sets the day
and time when it receives Caller ID information from your phone
company. If you want to set the clock manually, just open the menu
and select
Day and Time
. The phone prompts you to select the day,
enter the time, and select
AM/PM
. (When prompted for the time, use
XDECT R035 OM.indd 15 22/9/11 1:51:11 PM