Filter
Top Products
24
To... Follow these steps:
make an intercom page
Press
CLEAR/INTERCOM
, then select the
handset you want to talk with (select
All to page all handsets at the same
time).
cancel a page Press
END
.
answer an intercom page Press
CLEAR/INTERCOM
or
TALK/FLASH
.
leave an intercom call Press
END
.
answer an outside call
during an intercom call
Press
TALK/FLASH
or
LINK
(depending
on which line is ringing). The phone
automatically disconnects the
intercom call and connects you to the
outside line.
Using Special Features
Do Not Disturb (DND)
The Do Not Disturb feature (DND) turns off the ringers on the base x
and all handsets at the same time.
You can turn on DND from the base whenever the phone is in
x
standby: just press and hold
DO NOT DISTURB
for about a second.
The phone automatically turns on the answering system and
shows
Do Not Disturb
on all handsets.
To turn DND off, press
x
DO NOT DISTURB
again.
If you turn the answering system off while DND is on, the phone
x
turns off DND along with the answering system.
Chain dialing
If you often have to enter a series of digits or a code number x
during a call, you can save that code number to a phonebook entry
and use the phonebook to send the code number.
Enter the code number (up to 20 digits) into the phonebook just
x
like a regular phonebook entry. Be sure to enter the code number
into the phonebook exactly as you would enter it during a call.
When you hear the prompt that tells you to enter the number,
x
open the phonebook and find the entry that contains your code
XDECT R035 OM.indd 24 22/9/11 1:51:13 PM