29Uniden MHS450 Radio Owner’s Manual
USA/CAN/INT (U.I.C.) — Settings
The radio is set as a factory default to the USA channel
frequencies. To change to either Canadian [CAN] or
International [INT] channels follow these steps.
Press MENU and highlight USA/
CAN/INT. Press ENTER.
Press either ▲ or ▼ until the
country Mode is highlighted. Press
ENTER to select it.
Highlight EXIT to exit the menu then press ENTER to
return to radio operation.
Note: the radio remembers the last selection setting you make
when powered down.
Lamp (Backlight) Adjust
The backlight that provides
convenient illumination of the keys
and the LCD has three settings.
Press ▲ or ▼ to scroll to
Lamp Adjust. Press ENTER.
LAMP ADJUST appears at the top of the screen.
Highlight either Always Off, Always On, or Timer.
Press ENTER to select your choice.
To set the on-time duration of the backlight, select
Timer then highlight either 5 seconds (default), 30
seconds, 1 minute, or 5 minutes then press ENTER. A
double beep sounds to conrm your selection.
Scroll to EXIT and press ENTER to return to the
RADIO MENU menu screen.
1.
2.
3.
1.
2.
3.
4.
Intl Mode
USA Mode
Canadian Mode
UIC CHANNELS
Exit
Intl Mode
USA Mode
Canadian Mode
UIC CHANNELS
Exit
Always On
Always Off
Timer
LAMP ADJUST
Exit
Always On
Always Off
Timer
LAMP ADJUST
Exit