Uniden MHS450 Two-Way Radio User Manual


 
22
Uniden MHS450 Radio Owner’s Manual
To install the four AAA batteries in the alkaline battery pack,
refer to the illustrations and the following steps.
Hold the lower part of the pack and with the other
hand, lift the cover to reveal the contacts in the
chamber. Note the polarity markings.
Position the alkaline batteries according to the + and
- terminals and snap each into place.
Close the cover as shown.
Using alkaline batteries let you continue to use the radio
until you have an opportunity to fully recharge your primary
Lithium Ion Battery pack. Be sure to dispose of the alkaline
batteries properly according to their package information.
Warning - although the design of the case prevents
accidental charging of installed alkaline batteries, for safety,
never attempt to recharge alkaline batteries by defeating the
case design or recharging outside of the case.
1.
2.
3.