Filter
Top Products
21
The handset and the base can be used on separate telephone lines at the same time.
For example, if the handset is on a call with
line 1
, you can make, or receive calls at the
base on
line 2
.
The
line 1
LED on the base flashes green to
indicate line 1 is In Use at the handset.
When line 1 is In Use at the base the LCD screen
displays the following:
2-Line operation
line 1 line 2
conference
mute hold
2-Line features
(Base)
Line 1
Note When you attempt to make a call, the EXI 7926 informs you if a line is
currently In Use.
Extension In Use
The Extension In Use feature prevents accidental interruption of ongoing telephone
conversations.
• If you attempt to make a call and another phone is In Use on line 1, the handset LCD
indicates an extension is In Use. (The
line 1
LED at the base blinks.) If you press
line 1
, you will hear a beep. This warns you the line is In Use. To make your call, you
must use
line 2
.
Notes • If you want to join a conversation on an extension currently In Use, press
or twice.
• The flash feature does not function when the phone is in the conference
mode.
line 1
line 2
Base ringer volume
The ringer control for the base of your EXI 7926
allows you turn the ringer
OFF
or to select
LO/HI
volume for each
line 1
or
line 2
.
Base speaker volume
To control the speaker volume of the base, adjust
the
VOLUME
slide switch as desired.
Basics
(continued)
EXI 7926 H1 99.8.23 11:32 AM Page 21