Filter
Top Products
13
Step 4
Setting up Caller ID options
There are three Caller ID options available; they are AutoTalk, CIDCW, and Area Code.
AutoTalk allows you to answer the phone without pressing or . If the
phone rings when AutoTalk is on, simply remove the handset from the base and the
phone automatically answers the call. If the phone rings when AutoTalk is off, you must
press or to answer the call. This option is useful for screening calls.
CIDCW (Caller ID with Call Waiting) performs the same as regular Caller ID on a call
waiting number. You must subscribe to CIDCW from your phone company to use
this feature.
If you enter your 3-digit area code number in the Area Code option, your local area code
does not appear in Caller ID messages. When reviewing Caller ID messages, you will see
only the local seven digit number. For calls received from outside your local area code, you
will see a full 10-digit number.
To change your Caller ID options:
1 When the phone is in the standby mode, press and hold until the
Caller ID setting screen appears.
2 Press or to select "Line 1" or "Line 2".
3 Press . The following screen appears.
4 Press or keys to move the cursor to the selection that
you would like to change. Press the key to toggle between “
On” and
“Off”. Press . Use the number keypad to enter or change the area code.
Press again.
5 After you have made your selections, press or return the handset to
the base.
1 Auto Talk:Off
2 CIDCW :On
3 Area Code:
call id/hold
•
up/int'com
dn
ª
/conf
sel/vol
Caller ID Setup
1 Line 1
2 Line 2
hold conf int'com
updn
flash
deletecall id
hold conf int'com
updn
flash
deletecall id
chan redial/psel/vol
•
up/int'com
dn
ª
/conf
line 1
line 2
line 1
line 2
sel/vol
sel/vol
sel/vol
Note If your calling area requires 10-digit dialing do not program this option.
call id/hold
EXI 7926 H1 99.8.23 11:31 AM Page 13