Filter
Top Products
17
1 Press .
2 Dial the number on the keypad, or, use one of
the memory features. (See Using memory
dialing, page 32.)
3 When you finish the call, press to hang up.
Basics
(continued)
Making a call from the base
line 1 line 2
conference
mute hold
status
line 1
line 1
Off-hook dialing
1 Pick up the handset.
2 Press .
3 Dial the number on the keypad. Or use
one of the memory features. (See Using
memory dialing, page 32.)
4 When you finish the call, press or, return the handset to the base.
On-hook dialing
To call a number while the handset is in standby mode, dial the number on the keypad,
or use one of the memory features. Press . (See Using memory dialing,
page 32.)
Making a call from the handset
mem
line1 line2
line 1
line 1
line 1
Hint AutoStandby automatically hangs up when you place the handset on the
base. These is no need to press or to hang up.
line 1
line 2
Note If a line is in use, or a phone off the hook, the LCD screen reads
“
In Use Line 1”.
If you are dialing in the pulse mode and need
to enter tone digits, press then enter
the digits. Once the call has ended, tone mode
is canceled and pulse dialing resumes.
Using the tone feature
oper
0
tone
updn delete
call id
/
0
/tone
*
Note The tone feature applies only when the base is set to pulse.
EXI 7926 H1 99.8.23 11:31 AM Page 17