Filter
Top Products
52
You cannot use
# and
while the new messages
are playing. Press # then
5 to stop message
playback first and go to
step 5.
If you enter an incorrect
PIN code three times, an
error tone sounds and the
phone automatically
hangs up.
Remote room monitor
You can call your answering system from any touch-tone phone and
monitor sounds in the room where your base is installed.
1 Call your telephone number.
2 While the answering machine is activated, press # and your PIN
code.
3 The answering system begins announcing the time and day.
4 Press # then 5 to stop the message.
5 Press # then . You hear sounds in the room where your
phone is installed. After 15 seconds, the answering system
returns to the command waiting mode.
6 Press # then to monitor the room for another 15 seconds. Or
select another remote function. Or hang up to exit the system.
The answering system automatically returns to standby.
Turn on the answering machine remotely
If you have forgotten to turn on your answering machine, you can
turn it on remotely from any touch-tone telephone.
1 Call your telephone number.
2 Wait ten rings until the machine answers.
You hear a beep.
3 Press # and enter your PIN code within two seconds.
The answering system begins to announce the time and
day stamp.
4 Press # then 5 to stop the announcement.
5 Press # then 6 to turn the answering system on.
6 Hang up the phone and subsequent calls will be answered by
the machine.
*
*
*
EXAI985HS 10/10/00 10:15 Page 52