Filter
Top Products
12
Battery use time (per charge)
From fully charged
• Seven hours continuous use.
• Seven days when the handset is in the standby mode.
When the battery charge becomes low
When the battery pack is very low and needs to be charged, the
phone is programmed to eliminate functions in order to save power.
If the phone is not in use, “
Low Battery” flashes and none of
the keys will operate. If the phone is in use, “
Low Battery”
flashes and the handset beeps.
Complete your conversation
as quickly as possible and
return the handset to the
base unit for charging.
Cleaning the battery contacts
To maintain a good charge, it is important to clean the battery
contacts on the handset and base unit about once a month. Use a
dry cloth or pencil eraser, if necessary.
Do not use any liquids or solvents.
Even when the battery
pack is not being used, it
will gradually
discharge over a long
period of time. For
optimum performance, be
sure to return the handset
to the base unit after a
telephone call.
The redial memory
numbers are retained for
up to two minutes while
you replace the batteries.
If you must replace the
battery pack during a
telephone call, complete
the replacement within
30 seconds, and you can
return to the original call.
(If the replacement battery
pack is not fully charged,
the call may disconnect.)
EXAI985HS 10/10/00 10:11 Page 12