Filter
Top Products
Other Operations
To Do this
To improve reception Press during the
conversation. “Scanning” appears
on the display. If the operation
fails, the error tone sounds.
To adjust the earpiece volume Press or during the call.
To temporarily switch to tone dial Press . The following
(When the base is set to pulse numbers dialed will be sent as
mode) tone dialing.
To enter a pause within the Press . “P” appears in the
dialing sequence. display which represents a pause.
15
From the handset
Dialing from standby
1 Pick up the handset.
2 Dial the phone number.
3 Press .
4 To hang up, press or return the
handset to the base.
Dialing from talk mode
1 Pick up the handset and press .
2 Dial the phone number.
3 To hang up, press or return the
handset to the base.
From the base
1 Press .
2 Dial the number on the keypad.
3 To finish the call, press to
hang up.
BASICS
The base microphone is
located under the phone.
Position yourself as near
to the base as possible and
speak clearly.
EXAI985HS 10/10/00 10:12 Page 15