Filter
Top Products
9
Step 3
Preparing the battery pack
Charge the battery pack for more than 12-15 hours before connecting the phone line.
1 Press and slide the battery compart-
ment cover toward the bottom of the
unit.
2 Connect the battery pack connector
with the correct polarity (black and red
wires), then insert the battery pack
into the battery compartment.
3 Securely close the battery compart-
ment cover by sliding it up until it
snaps into place.
4 Place the handset on the base unit
with the keys and display facing
upward.
This position lets you see Caller ID
messages on the display.
When the handset has been properly
placed on the charging terminals of
the base unit, the “
status
” LED of the
base unit lights and charging begins.
Charge the battery for 12-15 hours.
You can place either side up for charg-
ing the battery.
Black
status
LED
Red
Total:00
EXAI 7980 6th HEN 99.8.24 4:52 PM Page 9