Filter
Top Products
13
Making calls
On-hook dialing
1 Dial the phone number.
(Phone numbers can be up to 32
digits.)
Example: Enter 817-858-3300
2 Press . “Talk” flashes on the
display.
3 The number is dialed. After about 5
seconds, the call-time display appears.
4 Press or place the handset on
the base to end the telephone call.
The call-time will be displayed for
about 5 seconds.
chan
redial/p
•
up
/tone/
0
*
dn
ª
8178583300
Talk
8178583300
Talk 0:00
8178583300
talk
5:15
Other Operations
To Do this
To improve reception Press .
To adjust the ear speaker volume Press or .
To temporarily switch to tone dial (base Press . The following numbers
must be set to pulse mode) dialed will be sent as tone dialing.
To enter a pause within the numbers dialed Press .
chan
dn
ª
•
up
/tone/
0
*
redial/p
Notes
• If there is no key entry for more than 20 seconds, on-hook dialing is cancelled and the
telephone returns to the standby mode.
• The phone number can be edited before pressing .
talk
talk
EXAI 7980 6th HEN 99.8.24 4:52 PM Page 13