Filter
Top Products
5) Plug one end of the telephone
cord into the TEL LINE jack
on the back of the base, then
plug the other end into a
standard telephone jack.
6) Line up the mounting slots on
the base with the mounting
posts on the wall, then push
in and down until the
phone is firmly seated.
7) On the base unit, pull the handset
retainer out of the slot and rotate
it clockwise 180 degrees.
8) Flip the retainer from front to back,
then slide it back into the slot so
that the lip of the retainer faces up
and the oval is at the bottom of the
retainer. This will hold the handset
in place.
5
!
DO NOT use an outlet
controlled by a wall switch.
INSTALLING AND ADJUSTING
!
Before you plug the other
end of the telephone cord
into the modular jack on
the wall, charge the battery
(refer to “Charging the
Battery Pack,” page 8).
H:...reprint 8-13-99EXA7950.vp
Tue Aug 17 15:31:28 1999
Color profile: Disabled
Composite Default screen