Filter
Top Products
9) Flip the retainer from front to back,
then slide it back into the slot so
that the lip of the retainer faces up
and the oval is at the bottom of the
retainer. This will hold the handset
in place.
INSTALLING THE HANDSET BATTERY PACK
1) Remove the handset battery cover.
2) Plug the battery’s cable into
the handset
3) Replace the battery cover.
CHARGING THE BATTERY PACK
▼
Initial battery charging
Before plugging the phone line into your new phone for the first time,
fully charge the rechargeable battery pack for 15-20 hours
without interruption.
1) Place the handset on the base.
2) Make sure that the
status
LED lights. If the LED doesn’t light, check to
see that the AC adapter is plugged in and that the handset makes good
contact with the base charging contacts.
8
1
2
3
NOTE
The plastic connectors will fit together only one
way. Make sure the battery’s connector is
properly aligned. Use only the Uniden battery
pack (model BT-905).
H:...reprint 8-13-99EXA7950.vp
Tue Aug 17 15:31:35 1999
Color profile: Disabled
Composite Default screen