Filter
Top Products
TURNING THE ANSWERING SYSTEM ON/OFF
1) To turn the answering system on,
press
answer on/off
. A beep
tone will sound and the current
outgoing message will play on the
base speaker. A second beep tone
will sound after the outgoing
message plays. The message
counter LED lights to indicate that
the unit is ready to answer calls.
2) To turn the answering system off, press
answer on/off
again. A beep
tone will sound followed by the announcement “Answer off” and the
message counter LED will go out.
SETTING THE CLOCK
The clock on the EXA7950 Answering System starts when power is
applied to the base. Follow these steps to set the clock to the
correct time:
1) Press and hold
clock
until a beep
tone sounds.
2) Next, press the
skip
or
repeat
key until the correct day is
announced. (Numbers zero
through six display on the base
as each day is announced.)
3) Press
clock
again to select the day. The hour setting is announced.
17
ANSWERING DEVICE SETUP
clock
NOTE
Press
skip
or
repeat
multiple times to scrol
through days, hours,
minutes, etc.
NOTE
If you make no entries
within two minutes, the
system returns to standby.
TIP
Adjust the volume of the
system’s announcements
by pressing ▲ or louder
or ▼ for softer on the
base speaker.
H:...reprint 8-13-99EXA7950.vp
Tue Aug 17 15:31:49 1999
Color profile: Disabled
Composite Default screen