32
Answering Machine Features
SKIP/QUICKREPEAT/SLOW
Answering Machine Features
Setting up the answering machine
Setting the time and day of the week
1 Press repeatedly until
you hear “Set day and time”.
“- -” appears on the display.
2 Press , and you’ll hear
voice guidance.
3 Press or
repeatedly to
select the day of the week.
4 Press .
The day is set and the hour is
announced.
5 Press or
repeatedly to
select the hour.
6 Press .
The hour is set and the minute is
announced.
7 Press or
repeatedly to
select the minute.
8 Press .
The day and time you just
entered is announced and the
clock restarts.
9 Press to exit the
menu setup mode.
PLAY/STOP
TIME/SET
SKIP/QUICK
REPEAT/SLOW
TIME/SET
SKIP/QUICK
REPEAT/SLOW
TIME/SET
SKIP/QUICK
REPEAT/SLOW
SELECT
MENU
Notes
• The time and day are preset to Monday, 12:00 AM.
•“PF” flashes when the day and time is cleared or delayed due to a power interruption, or
when you connect the base phone to the AC outlet for the first time.
• Do not allow more than 20 seconds (or 60 seconds when setting the day and time) to elapse
between each step of the procedure.
• If a power interruption occurs, the day and time will be erased.
• If the current day and time are not set, you will not hear a time stamp when you play back
recorded messages. If you try to check the current time, you will hear five short error beeps.
EXA2955-9/21 9/21/01 4:45 PM Page 32