Filter
Top Products
Telephone Features
Telephone Features
continued
25
IN USE LED
Switching the phones during a call
When you put a call on hold, you can return to the call on the other
phone without disconnecting the call.
1 Press on the base
phone.
The IN USE LED and the
TALK/BATT LOW LED on the
handset will flash slowly.
2 Press or pick up the
handset from the base phone.
The IN USE LED and the
TALK/BATT LOW LED on the
handset will light up.
3 When you are done talking,
press or replace the
handset to the base phone.
OFF
TALK
HOLD
To switch from the base phone to the
handset
Notes
• If you pick up the handset while talking through the speakerphone on the
base phone, the call will be switched to the handset.
• If you do not press in step 1, and press in step 2, you can
make a three-way conversation (see “Having a three-way conference” on
page 31).
• When the call is put on hold on the base phone, if you pick up the handset,
the call will be switched to the handset.
TALK
HOLD
TALK/BATT
LOW LED
OFF
TALK
EXA2955-9/21 9/21/01 4:45 PM Page 25