Filter
Top Products
52
5) After all of the voice prompts have been played, you hear intermittent beeps indicating that the system is in the
command waiting mode. You may enter another command at this time from the chart.
6) When you are nished, hang up to exit the system. The answering machine automatically returns to standby.
Note: For your convenience remote operation cards are provided for you to use while away from
home (located back of this manual).
Turn on the Answering Machine Remotely
If you have forgotten to turn on your answering machine, you can turn it on remotely from any touch-tone telephone.
1) Call your telephone number.
2) Wait ten rings until the system answers. You hear intermittent beeps.
3) Press
[0] and then enter your PIN code. The answering machine announces the number of messages stored in
memory. You hear "To play incoming message, press zero two. For help, press one zero."
4) Press
[0] then [6] to turn the answering machine On. You hear the outgoing message and a conrmation tone.
5) Hang up the phone; subsequent calls will be answered by the system.