Filter
Top Products
42
Setting Up Your Answering Machine
• For your convenience, voice prompts will guide you through the menus.
• Press
[ ] (play/stop) on the base to return to standby.
• If you do not press a key within thirty seconds, the phone will time out and exit the menu.
Selecting a Language
You can set the language of your base menu display and answering machine announcements to English, French,
or Spanish. To select your language choice, please refer to "Selecting a Language for your Answering Machine and
Base Display" on page 17 under "Base Setup".
Setting the Record Time (or Announce Only)
You can select how long a caller has to record a message. You have three record time options. The options 1
MINUTE or 4 MINUTES set the duration for recording the incoming messages. ANNOUNCE ONLY answers the call
and plays either your personal greeting or the pre-recorded system greeting, but prevents the caller from leaving a
message.
1) Press
[clock/menu] on the base.
2) Press [cid select/
] to move the pointer to select RECORD TIME, and then
press [set].
3) Press [cid select/
] or [cid select/ ] to select Record Time 1 MINUTE, 4 MINUTES, or ANNOUNCE ONLY.
4) Press
[set]. You will hear a conrmation tone.
0
Record Time:
1 Minute
Press / or set
<
>
0
Record Time:
1 Minute
Press / or set
<
>