Filter
Top Products
18
Setting Caller ID on Call Waiting (CIDCW)
Caller ID on Call Waiting (CIDCW) displays the name and number of an incoming call while you are on the line.
1) When the phone is in standby, press
[clock/menu] on the base.
2) Press [cid select/
] to move the pointer to select CIDCW, and then press [set].
3) Press [cid select/
] or [cid select/ ] to select ON or OFF, and then press
[set]. You will hear a conrmation tone.
Setting the Area Code
If in your local calling area you can make a local call by dialing only seven digits (instead of ten), you can program
your local area code in your phone. Calls that come from within your area code will show only the seven-digit phone
number; calls from outside your area code will show all ten digits. To enter an area code, follow the steps below:
1) When the phone is in standby, press
[clock/menu] on the base.
2) Press [cid select/
] to move the pointer to select AREA CODE, and then press
[set].
3) Press the number keypad
[0-9] to enter a three-digit area code.
4) If you press
[set], the stored number will be transferred to the cordless handset. If the transfer is successful, you
will hear a conrmation tone from the base and cordless handset.
Otherwise, AREA CODE SETTING FAILED! appears on the display and an error tone sounds. You will have to
start over with the procedure you are performing.
Note: If the area code has already been stored in memory, the stored area code will be displayed. To
change it, use [ ] (delete) and the number keys to enter the new area code.
0
CIDCW:
On
Press / or set
<
>
0
CIDCW:
On
Press / or set
<
>
0
Area Code:
Press 0‑9 or set
0
Area Code:
Press 0‑9 or set