Filter
Top Products
43
Activating Call Screening
Your phone allows you to listen to callers leaving you a message. This feature can be turned on or off with the
following steps:
1) Press
[clock/menu] on the base.
2) Press [cid select/
] to move the pointer to select CALL SCREENING, and then
press [set].
3) Press [cid select/
] or [cid select/ ] to select ON or OFF.
4) Press
[set]. You will hear a conrmation tone.
Setting the Number of Rings
The ring time setting allows you to set the number of rings the caller hears before your answering machine plays the
outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver, the
answering machine picks up after two rings if you have new messages and after four rings if there are none.
1) Press
[clock/menu] on the base.
2) Press [cid select/
] to move the pointer to select RING TIME, and then press
[set].
3) Press [cid select/
] or [cid select/ ] to select a Ring Time (TOLL SAVER, 2 TIMES, 4 TIMES, or 6 TIMES).
4) Press
[set]. You will hear a conrmation tone.
0
Call Screening:
On
Press / or set
<
>
0
Call Screening:
On
Press / or set
<
>
0
Ring Time:
Toll Saver
Press / or set
<
>
0
Ring Time:
Toll Saver
Press / or set
<
>