Filter
Top Products
Banks and Channels
BC9000XLT
Banks
and
channels
are the way stored frequencies are
organized in your scanner.
A
channel
is a memory location where you store a frequency. The
channels in the BC9000XLT are numbered 1 - 500. A
bank
is a group of
channels. The BC9000XLT has 20 banks with 25 channels in each. The
banks are useful for storing similar frequencies in order to maintain faster
scanning cycles.
You can turn each bank on or off to control whether its channels are
included during scanning. When you turn off a bank, its channels are not
erased, but are only temporarily excluded from scanning. You can also
temporarily
lock out
individual channels within a bank during scanning.
Setting the Squelch
Use these controls:
1. Press muntil you do not
hear a signal.
Adjust VOLUME to a
comfortable listening level.
8
COUNT AUX STATUS
SCAN
SRC
MANUAL
AUTO
PROG SEND ALPHA
HOLD
LIMIT
MEM SHIFT
LINE
EXT SP
PRI TURBO CTCSS DATA
BRI DIM OFF
AM NFM WFM
5KHz 12.5 KHz 25KHz
CLR 50KHz HI-CUT
L/O DELAY ATT
12
4
7
5
8
0
3
6
9
E
A
F
B
G
C
H
D
I
E
J
FREQ
CHAN
LOCK
SQUELCH
VOLUME
OFF
BC XLT9000
TWIN TURBO
SQUELCH
VOLUME
OFF
ON/OFF/VOLUME and SQUELCH Controls
Bank A ch 22
L/O 000.0000MHz