Uniden BC9000XLT Two-Way Radio User Manual


 
1. Press P...
Then press Z.
2. Enter the channel number...
Note:
You must select a
programmed channel
.
Example: Channel 1
Then press h. The Alpha
Edit Screen appears.
3. Turn the Rotary Tuner left/right
to choose a letter from the
upper line of characters.
Example: “L”
Press h for uppercase
characters, l for lowercase
letters.
Repeat to choose more characters. You can enter up to 16 characters.
Note: Press U to move the edit cursor on the lower line to the
right.
Press S to move the edit cursor to the left.
4. Press e to program the
Alpha entry into the channel.
You can program channels 1 through 250 with alpha characters. If you try
to program channels above number 250, the scanner returns to the
“SELECT CHAN” screen.
Press s, m,orPto exit the Program Alpha mode.
To display the alpha characters, press Zwhile in the Scanning or
Manual Mode.
21
ALPHA or CTCSS
Select
Select chan 8
from 1 to 500
1
from 1 to 500
56789 /()& ch 1
LMNOPQRSTU ch 1
LMNOPQRSTU ch 1
L
Bank A P ch 1
Local Police