Filter
Top Products
Administrator Programming
IP5131-SDL Settings
136 Strata CIX IP5000-series Telephone UG 05/08
Headset Tx Volume Setting Screen
From the IP Configurations screen, select Sound >
> Headset Tx Vol. The Headset Tx Volume screen
displays.
To Change Information on this screen
1. Enter the New volume level.
2. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Sound Setting screen 2.
Notes
• Use the dial pad (1~0) to change or enter volume level. Press Vol t to backspace.
• You can enter a maximum of one digit.
• Pressing the Set soft key can give you an Error Screen if you did not enter any data
or entered a non-numeric entry.
• Press the Ok soft key on the Error Screen to correct the entry. Five seconds after
the Error Screen displays, the screen automatically goes back to the Headset Tx
Volume screen and the number that resulted in an error will be displayed.
Handset Rx Output Setting
1. From the IP Configurations screen, select Sound >
> Handset Rx Mode. The Handset Rx Mode screen
displays.
2. Press the On or Off soft keys to change the set value.
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
The changed setting is underlined in the Sound screen
display.
Headset Tx Volume
3
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New (0:Min. - 7: Max)
Handset Rx Mode
On
Off
[Set] [Cancel]
Config