Filter
Top Products
Administrator Programming
IP5131-SDL Settings
Strata CIX IP5000-series Telephone UG 05/08 115
Advance Page 1:Displays or sets the Primary Name Server, the
Secondary Name Server, GRQ Port, RRQ Port, and AP Address
Page 2:Displays or sets the Admin address upper and lower
bound, the User ID and password, as well as the Dynamic Port
Base.
Page 3:Displays or sets the VLAN Setting, PC Port type and PC
Port VLAN ID.
Sound Page 1:Displays settings for Keybeep, Roam Noise, Handset
BOV, and Carbon Handset and Carbon Headset.
Page 2:Displays or sets the Headset and Handset Control
Modes as well as the Transmit and Receiver levels.
Page 3:Displays or sets the Sidetone Mode and Volume.
Others Displays or sets the Language, Input times and Backlight
settings.
Key Repeat Displays or sets the Key Repeat settings including the Delay
Timer and Repeat Rate.
Net Diag Displays an option for a Loop Back Test.
Factory Settings Displays ADM/Debug Mode, Display / Key Test and Display
Mode.
Initialize Displays or resets the following settings: all Data, Network,
Sound, Browser, LCD, Key Repeat, Others, Factory.
Reset Displays an option to Reset the IP phone.
Saving Changes When Changes are made throughout the IP Configurations
menus, the Set softkey saves the setting. Press Set until the IP
Configurations screen is displayed then press Reset softkey to
reboot the phone to apply the settings.
ITEM INFORMATION DISPLAY