Filter
Top Products
Administrator Programming
IP5131-SDL Settings
Strata CIX IP5000-series Telephone UG 05/08 131
External Administration User ID Setting
Use this screen to set an User ID. External accessing is enabled when the user can
successfully log in with correct User ID and Password
1. From IP Configurations > Advanced > > User ID.
The External Administration User ID Setting screen
displays (shown right).
2. Enter the New User ID to change or add a User ID
(maximum 16 characters).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
Note For other notes, refer to “Station ID” on page 122.
External Administration Password Setting
1. From IP Configurations > Advanced > >
Password. The Password screen displays (shown
right).
To change or add a new password
Note The Password can be alphanumeric, see “Dial Pad
Alphanumeric Characters” on page 128 to enter the
Password.
2. Press the Current soft key (left), then enter the Current
Password.
3. Press the New soft key (left), then enter the New Password (maximum 16
characters).
4. Press the New Again soft key, then re-enter the new password.
5. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and go to the Advanced Setting
screen.
Note For other notes, refer to “Station ID” on page 122.
User ID
9999
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New
Password
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New
:New Again