Filter
Top Products
Administrator Programming
IP5131-SDL Settings
Strata CIX IP5000-series Telephone UG 05/08 125
Advanced Network Settings
To access the Advanced Network Setting screens
1. Press
Hold+3+6+9 (simultaneously).
2. Press Advanced softkey, the Advanced Setting screen appears.
Note There are three screens for Advanced Settings (shown below). Use the and
soft keys to move from one screen to another.
The general operation on the Network Settings screens is as follows:
• To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.
• Press the Set soft key to rewrite the NV-RAM data if any setting of a minor item is
changed. The screen will move to the Resetting Selection Screen. (The Resetting
Selection Screen will be described in detail later.)
• Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the IP Configurations screen without rewriting the NV-RAM
data.
Advanced Setting
P-DNS : 0. 0. 0. 0
S-DNS : 0. 0. 0. 0
GRQ Port : 0
RRQ Port : 0
AP Addr : 0. 0. 0. 0
[Set] (1/3) [Cancel]
Config
Advanced Setting
Admin_U : 0. 0. 0. 0
Admin_L : 0. 0. 0. 0
User ID : 9999
Password : ****
Dynamic Port
[Set] (2/3) [Cancel]
Config
Advanced Setting
VLAN : Disable
Phone VLAN ID : 1
[Set] (3/3) [Cancel]
Config
PC Port Type: Access
PC Port VLAN ID : 1
VLAN : Disable