Filter
Top Products
Administrator Programming
IP5131-SDL Settings
114 Strata CIX IP5000-series Telephone UG 05/08
IP5131-SDL Settings
This section contains instructions to configure the IP5131-SDL telephone. All
instructions found in this section pertain to the items found in the IP Configurations
screen of the IP5131-SDL telephone.
Configurations
Press Hold+3+6+9 (simultaneously) to display the IP
Configurations main screen.
To access any of the screens that relate to an item on
the Configurations screen
Press the soft key that corresponds to the item. The
details pertaining to that item display.
Note The following table explains each of the items
displayed on the Configurations screen.
ITEM INFORMATION DISPLAY
Term Info Displays the Software Version, the MAC address, the Regional
Code and xIPU address. You can press the EXIT soft key to go
back to the IP Configurations screen.
Note This screen is for display only and you cannot make any
changes to the settings.
Network Page 1:Displays or sets the DHCP, IP Address, Subnet, the
default gateway, station information and LIPU Address.
Page 2:Displays or sets node, IPU Mode, Primary IPU,
Secondary IPU and Port Settings.
Page 3:Displays or sets Auto Login Mode and Auto Login
password.
IP Configurations
Term Info
Network
Advance
Sound
Others
Key Repeat
Net Diag
Factory
Initialize
Reset
Config