Toshiba DKT2404-DECT Cordless Telephone User Manual


 
Operation & Setup
F9~F12 Feature Buttons
Strata CIX DKT2404-DECT User Guide 04/09 37
Dial Out
1. Press the TALK button on the handset (the current volume shows for 2 seconds)
to get dial tone.
2. Press a One Touch Dial button - the number registered will be shown and the digits
sent to the Strata CIX.
ä An error tone is emitted when the handset does not have a One Touch button.
ä During a conversation you can send a One Touch dial number at any time. When
the One Touch number is sent, the current dial display disappears.
ä When a function button is pressed while the digits are being sent, the dial output is
canceled.
F9~F12 Feature Buttons
The F9~F12 buttons on your cordless telephone can be assigned as one-touch dial
buttons and were preassigned upon system installation. If you are not using these
buttons for the assigned features, you can invoke features with access codes. See
Step 4: “Feature Access Codes” for access code sequences that match your Toshiba
telephone system.
Place a Call on Hold
ä Press the Hold button. HOLD displays on the LCD.
ä To resume the call
ä Press the flashing function button.
Transfer a Call
ä Press Cnf/Trn. The dialed numbers saved in transfer memory is shown on the
display after two seconds. When the receiving party answers, press Cnf/Trn to
complete the transfer.