Toshiba DKT2404-DECT Cordless Telephone User Manual


 
Installation
Step 6: Wall Installation (Optional)
Strata CIX DKT2404-DECT User Guide 04/09 17
Charging Unit Wall Mounting
The charging unit is also designed to be wall mounted. Before mounting your charging
unit, consider the following:
Select a location away from electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting screws into the wall.
Make sure the wall material is capable of supporting the weight of the charging
unit.
Use #10 screws with anchoring devices suitable for the wall material where the
charging unit will be placed.
1. Insert two mounting screws 2 inches apart. Allow
about 3/16 of an inch between the wall and screw
heads for mounting the telephone.
2. Plug the AC adapter into the charging unit as
previously described. Wrap the AC adapter cord
around the strain relief (shown right).
3. Place the charging unit on the posts of
the wall screws and push down until it is
firmly seated (shown right).
4. Plug the AC adapter into a standard
120VAC wall outlet.