Filter
Top Products
Installation
Step 8: Charge Batteries for First Time
Strata CIX DKT2404-DECT User Guide 04/09 19
Step 9: Install Headset (Optional)
The optional headset provides hands-free option.
With the headset installed, you can use the belt clip to
carry the handset and conduct a conversation. All
feature operations remain the same except the
handset earphone and microphone are disconnected.
ä Open the cover over the headset jack that is
located on the top of the handset and plug in the
headset as shown at right.
Important! Only use headsets especially designed
or modified for use with radio frequency
equipment.
Step 10: Attach Belt Clip (Optional)
Note The belt clip is designed to fit snugly onto the handset.
1. Snap the tab out of the belt clip notch on the top of the handset.
2. Slide the belt clip into the space where the belt clip tab was,
carefully aligning the belt clip sides to the notches.
3. Press firmly until it snaps into place.
4. Use the belt clip to attach the handset to your belt or pocket.
ä To remove the belt clip
1. Carefully pry the tabs loose and remove the belt clip.
2. Reinstall the cover tab.