![](http://pdfasset.owneriq.net/0/2f/02fb9e9c-06e7-4891-915e-d72c297934c5/02fb9e9c-06e7-4891-915e-d72c297934c5-bg3c.png)
Features
Call Forward
48 Strata DKT2104-CT Cordless Digital Telephone 5/00
Call Forward–External
This feature enables the forwarding of calls to your [PDN] to a destination outside of
the system. The CF–External destination can be a number over a CO Line, over a Tie
line, or within your Strata DK system. Any of the CF modes can be set for your
[PDNs] or [PhDNs] simultaneously.
[PhDNs] assigned to your handset and internal or transferred calls to your [PDN] do
not CF to external destinations. Only incoming calls over CO Lines dedicated to your
[PDN] and/or Direct In Dial (DID) line calls are forwarded.
When forwarding to an outside destination, include the CO Line (or CO Line Group)
access code before the telephone number. See Table 6 on Page 86 for the CO Line/
Line Group access codes. The LCR access code “9” cannot be used.
Important!
● Only perform the following procedure the first time CF–External is set or when
you change the destination. It is not necessary to store the destination each time
you set CF–External; it remains in system memory.
● This feature stores the calls to Station Speed Dial Code 49. Use the Speed Dial
storage procedures detailed in this chapter.
Set CF–External
1. Press the [PDN] +
+ WDON.
You hear confirmation tone.
2. Enter the [DN] to
which calls are
forwarded.
3. Press
WDON.