Filter
Top Products
Installation
Connect and Apply Power
Strata DKT2104-CT Cordless Digital Telephone 5/00 15
Step 5: Connect and Apply Power
Base Unit
1. Plug the AC adapter cord into the
AC adapter input jack on the Base
Unit (shown at right).
2. Plug the AC adapter into a standard
120VAC wall outlet.
3. Check to see that the power LED is
on.
Charger Unit
1. Plug the AC adapter cord into the
input jack on the Charger Unit
(shown at right).
2. Plug the AC adapter into a standard
120VAC wall outlet.
3. Check to see that the power LED is
on.
Important!
● If the power does not light on either the Charger or Base Units, return everything
to your Authorized Dealer.
● Always route the power cord where it is not a trip hazard, and where it cannot
become chafed and create a fire or electrical hazard.
AC Adapter
4381
4552