Filter
Top Products
Installation
Select Location
12 Strata DKT2104-CT Cordless Digital Telephone 5/00
Step 2: Select Location
1. Select a location that is not subject to excessive heat or humidity.
2. Determine if the Base Unit will sit on your desk or be wall mounted. If wall
mounted, go to Step 3: “Mount on a Wall”.
3. Place the Base Unit on a desk or tabletop near a standard 120VAC outlet and
within reach of the Strata DK digital line connection.
4. Keep the Base Unit and handset away from sources of electrical noise, such as
motors and fluorescent lighting.
Important! Place the Base Unit to the right of the DKT. If placed on the left, the
cordless antenna picks up a tone due to its close proximity to the DKT
speaker and electronic parts.
Step 3: Mount on a Wall
1. Select a wall location near a 120VAC outlet and within reach of the Strata DK
digital line connection.
2. Place the wall plate (shown at right) against
the wall, and with a pencil, mark the position
of the screws.
3. With a punch tool, punch “starter” holes in
the wall.
4. Align the wall plate and screws on the wall
where the “starter” holes are and tighten
down the screws.
4449