Filter
Top Products
98
Learning the Basics
Using the DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
Removing a disc with the computer on
To remove a compact disc (CD or DVD) with the computer
turned on:
Never press the eject button or turn off the computer while the
in-use indicator light is glowing. Doing so could damage the
disc or the drive.
1 Press the eject button on the drive.
The disc tray partially opens.
If the disc is still spinning when you open the disc tray, wait for
it to stop before removing it.
2 Pull the tray until it is fully open.
3 Remove the disc and place it in its protective cover.
4 Gently push the tray in to close it.
Removing a disc with the computer off
To remove a compact disc with the computer turned off:
1 Insert a slender object, such as a straightened paper clip, into
the manual eject hole.
Never press the eject button or turn off the computer while the
drive-in-use light is glowing. Doing so could damage the disk
or the drive.
2 Pull the tray out until it is fully open.
3 Remove the disc and place it in its protective cover.