Toshiba A55 Telephone User Manual


 
70
Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
Selecting video cables
To connect a device to the S-video port, you will need to
purchase a cable. For the best video quality, always use a
properly shielded cable.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Using a poor quality cable may result in a dull or fuzzy
picture, poor color, ghosting, video noise, or loss of video.
Connecting to the S-video port
Video cables are not included with your computer. To connect
a device to the video-out port, you will need to purchase an S-
video cable.
To connect the device:
1 Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its video-in port.
2 Connect the other end of the video cable to the S-video
port on the back of the computer.
3 Turn on the external video device.
4 Set the display mode by pressing
Fn + F5, or by setting the
Display Properties settings. For more information, see
NOTE