Filter
Top Products
67
Getting Started
Setting up your printer
5.375 x 8.375 ver 2.3
The Add Printer Wizard asks you to select your printer.
TECHNICAL NOTE: If your printer is Plug and Play, the
Windows XP operating system recognizes it automatically. You
can ignore the remainder of this section. See your printer
manual.
4 If the printer you are setting up:
❖ Is not connected to a network, select Local printer
attached to this computer.
❖ Is connected to a network, select Network printer, or a
printer attached to another computer.
5 Click Next.
The Add Printer Wizard looks for a Plug and Play printer. If it
does not locate one, click Next.
The Add Printer Wizard prompts you for the printer port.
6 Select the port settings according to the instructions in
your printer’s documentation and the port to which your
printer is connected, then click Next.
The wizard prompts you to select your printer.
7 From the list of manufacturers and printers, select your
printer, then click Next.
The Add Printer Wizard prompts you to enter a “friendly”
printer name.
8 Enter a name for your printer.
HINT: If you are using more than one printer, make sure the
name is descriptive enough to help you tell the difference.
9 If you want this printer to be: