Filter
Top Products
104
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.3
2 Click the Toshiba Power Saver icon.
3 Click the Setup Action tab.
4 Select Hibernation for the options you want.
❖ When I press the power button
Set this option to Hibernate so that the computer will go
into Hibernation mode when you press the power button.
❖ When I close the lid
Set this option to Hibernate so that the computer will go
into Hibernation mode when you close the display panel.
5 Click Apply.
6 Click OK.
The computer is now set to automatically go into Hibernation
when your option settings occur.
For more information about the Power Saver utility, see
“TOSHIBA Power Saver” on page 154.
Once the computer is configured, place the computer into
Hibernation mode by either pressing the power button or
closing the display panel, depending on the hibernation
options selected.
Starting again from Hibernation mode
To restart the computer from Hibernation mode, press the
power button until the on/off light turns green. The computer
returns to the screen you were using.
If you place the computer in Hibernation mode by closing the
display panel, you can start it again by opening the display
panel.
NOTE