Filter
Top Products
Topcom Butler 6040 29
Topcom Butler 6040
ENGLISH
9.7 Memory full
When the memory is full, you get the screen message "Memory Full". You can no longer
send or receive SMSs. To continue to receive SMSs, you can delete some or all of the
messages. To delete all the messages stored in the "Inbox" and "Outbox":
•Select Menu and then SMS and confirm with OK.
•Select Delete Messages and press OK.
•Select All Messages with the navigator and press OK.
• The screen displays: All Messages: Confirm?. Confirm with OK or cancel with Back.
9.8 SMS Service center numbers
To send and receive SMS text messages you need the telephone number of your Network’s
SMS Centre. These numbers have been pre-loaded into the Butler 6040. You can also find
these numbers on the addendum sheet mentioned per country and per operator. If you
accidentally delete the SEND or RECEIVE SMS Service Centre numbers you will need to re-
enter them in order for your SMS Service to work.
9.8.1 To set the Receiving SMS Centre number
• From the standby screen, press SMS to open the SMS menu.
• Scroll to Settings and press OK.
•Press OK to open Service Centres menu.
• Scroll to Receiving Centre and select OK.
• The current stored number will be shown. Press Clear and enter the new number.
•Press OK to store the number.
9.8.2 To set and select the sending SMS Centre number
• From the standby screen, press SMS to open the SMS menu.
• Scroll to Settings and press OK.
•Press OK to open Service Centres menu.
• Scroll to Sending Centre and select OK.
• The current stored number will be shown. Press Clear and enter the new number.
•Press OK to store the number.
•Press Back to go to the Service Centres menu.
This centre number will be used to send a message!
9.9 Changing templates
• From the standby screen, press SMS to open the SMS menu. Scroll down to Templates
and press OK.
• Scroll to the template you want and press OK.
• Edit Template is highlighted. Press OK. Use CLEAR to delete characters or use the
navigator to move the cursor. Use the keypad to enter the new template then press
SAVE. The new template replaces the old one.