Filter
Top Products
28 Topcom Butler 6040
Topcom Butler 6040
•Select Delete User with the navigator and press OK. All the personal user accounts
appear on the screen.
• Using the navigator, select the account to be removed and press OK.
• Enter the system PIN (the factory setting is 0000), and select OK. The account is
deleted. All the SMS messages received by the account are deleted; those sent from the
account are still saved in the Outbox.
9.5 Allocating an SMS terminal number
It is possible for several SMS-enabled telephones to be connected up to the same line. So
that each telephone can continue to receive SMSs, they must be allocated different SMS
terminal numbers. This is network depending! To allocate a number:
• Press SMS.
•Select Settings with the navigator and press OK.
•Select Terminal Number with the navigator and press OK.
• The number "0" is pre-set. To change it: Enter the preferred number (from 0 to 9) and
confirm with OK.
If you have already created personal user accounts, your Butler 6040 will not allow you to
allocate a terminal number that corresponds to an existing user number. If two SMS-enabled
telephones connected up to the same line have the same terminal number, neither will be
able to receive SMSs. They must be given differing numbers.E.g. If you have already created
a user account with the number "3", you must allocate a terminal number other than "3".
If you keep the pre-set terminal number "0" in your Butler 5500 and your telephone number
is 123456789, your correspondents can continue to send you SMSs at 123456789. If you
give the terminal a number other than "0", you must tell your correspondents so that they can
continue to send you SMS messages: they will need to affix the terminal number to your
telephone number.E.g. If you give your Butler 5500 the terminal number "3" and your
telephone number is 12346789, your correspondents will need to send their SMSs to:
13456789 3.
9.6 Set SMS alert tone
Your handset can play a different melody, a morse beep or a discreet tone to announce a
new text message.
•Press SMS to open the SMS menu.
•Select Settings and press OK.
•Select SMS Alert. and press OK.
• Scroll to Set Alert and press OK.
• Select the type of alert you want and press OK to confirm or BACK to return to the
previous menu.
•Select ON or OFF and press OK to confirm the setting.