Filter
Top Products
Topcom Butler 6040 15
Topcom Butler 6040
ENGLISH
• Scroll or to the picture you want and press VIEW. The picture is displayed. Press
BACK to return to the picture list or press USE to assign the picture to the entry you
have selected.
• Press and hold Back to return to standby.
Copy entry to another Butler 6040 handset
You can copy an entry to another Butler 6040 handset registered to your base.
•Press NAMES then scroll or to the name you want, then press OPTIONS.
• Scroll to Copy Entry and press OK. Select By IrDA to send it by infrared (see also
12 “Infra red” or To Handset and press OK. The Copy Entry screen shows all
registered handsets.
• Scroll to the handset you want to copy to, then press OK.
•Press OK again to copy another number or press and hold Back to return to standby.
Copy the compleet phonebook to another Butler 6040 handset
You can copy the whole phonebook to another Butler 6040 handset registered to your base.
•Press NAMES then OPTIONS.
• Scroll to Copy All Names and press OK. The Copy All Names screen shows all
registered handsets.
• Scroll to the handset you want to copy to, then press OK.
• Press and hold Back to return to standby.
Copy from SIM card
You can copy complete phonebook lists from compatible mobile phone SIM cards. The SIM
phonebook is copied to the handset you are using. Before you start copy from SIM card,
please make sure you have programmed the correct country codes ( see 8.5 “SIM country
code settings”)
• Insert the SIM card into the slot on the base as shown below:
Note:Only 3V sim cards can be used!
•Press NAMES then OPTIONS.
• Scroll to Copy From SIM and press OK. The Copy From SIM screen is displayed.
• Enter the SIM card PIN code if requested and press OK. During copying, the screen
shows the name of each entry as it is copied. When finished you see Done. If you enter
the wrong PIN twice, Copy SIM Failed is displayed and the screen returns to standby. If
the handset memory becomes full during copying the screen shows Memory Full. Not
All Copied.
• Press and hold Back to return to standby.