Filter
Top Products
22 Topcom Butler 6040
Topcom Butler 6040
8.4 System PIN
The System PIN is used for registering and deregistering handsets and some other optional
settings. The default System PIN is 0000.
•Press MENU then scroll to Base Settings and press OK. Scroll to System Pin and
press OK.
• Enter the current PIN (Original setting 0000) and press OK.
• Enter the new PIN, press OK and enter it again.
•Press OK to confirm.
8.5 SIM country code settings
You can program the Butler 6040 how to convert telephone numbers stored on your sim card
when copying them to your handset phonebook memory (See § “4 Phonebook” ).
There are 3 rules how the convertion will be done:
1. If a number stored in the SIM card begins with '+' or '00', and the country code on the
SIM number matches with the programmed country code of the handset in this case,
those caracters are replaced by the programmed national code.
2. If a number stored in the SIM card begins with '+' or '00', and the country code on the
SIM number does not match with the programmed country code of the handset, in this
case, '+' is replaced by international code.
3. If a number stored in the SIM card does not begin with '+' or '00', in this case, nothing
is changed.
8.5.1 International code
•Press MENU then scroll to Base Settings and press OK. Scroll to SIM country setting
and press OK.
•Select International code
• Enter the international prefix
•Press OK to confirm.
Remark: If there is no International code programmed or SIM entry doesn’t have a
international code, the telephone number will be copied as it is without any changes.
The Country code and National code will be ignored.
8.5.2 Country code setting
•Press MENU then scroll to Base Settings and press OK. Scroll to SIM country setting
and press OK.
•Select Country code
• Enter the country code.
•Press OK to confirm.
Remark: If you add to the country code the area code, both will be removed when
copied. This way you can dial telephonenumbers without area code if needed.